construction report chassis Sdkfz.222
The Chassis
is, how can it be different ... :-)
from Land Rover.
I opted again for an automatic transmission.
After Reinhold from the Land-Rover Farm Scheeßel assured me that the installation of the engine can be done backwards, I had to see how the with the original frame so get there
Then, two dummy hoods of the body were made of 2mm metal plate and mounted on the chassis with the threaded already rearwardly engine to check where / how pedals etc. must be provided.
And then, after some time, the chassis was ready :-)
(Steering: The steering's position and steering wheel are only provisional)
